There’s something about the natural textures of wood that brings character and warmth to any space. Wooden wall tiles have become one of the most popular ways to achieve a rustic, traditional, or modern look in any room. These tiles can be used in bathrooms, living rooms, bedrooms, and even outdoors. They are easy to install and are relatively inexpensive compared to other types of wall décor. In the following guide, we’ll walk you through the steps of installing wooden wall tiles.

Materials and Tools You Will Need

Before you start the installation process, there are a few essential materials and tools you’ll need:

  • Wooden wall tiles
  • Construction adhesive
  • Sandpaper
  • Caulk
  • Paintbrush
  • Saw
  • Tape measure
  • Level
  • Pencil

Preparing the Wall

Before you start the installation process, it’s important to clean the wall and make sure it’s smooth and dry. If there are any rough spots or bumps on the wall, use sandpaper to smooth them out. Also, remove any nails, screws, or other objects that may protrude from the wall surface. This will ensure that the tiles lay flat and adhere properly to the wall.

Measuring and Cutting the Tiles

Measure the area where you want to install the tiles and determine the number of tiles you’ll need. Use a saw to cut the tiles to the desired size. Depending on the type and thickness of the tiles, you may need to use a different type of saw. It’s a good idea to test the saw on a small piece of tile first to make sure it cuts cleanly.

Applying the Construction Adhesive

Apply a generous amount of construction adhesive to the back of each tile using a paintbrush or caulk gun. Make sure the adhesive covers the entire surface of the tile and is evenly spread. Do not apply too much adhesive as it may cause the tile to warp or crack.

Installing the Tiles

Start by placing the first tile in the center of the wall and work your way outwards. Use a level to make sure each tile is straight and even. Lightly press each tile onto the wall, making sure it adheres properly. Use spacers to create even gaps between the tiles. This will ensure a uniform and professional-looking finish.

Cutting Around Outlets and Fixtures

If you encounter an outlet or fixture on the wall, you’ll need to cut the tile to fit around it. Take a measurement of the distance between the outlet and the nearest edge of the tile. Using a pencil, mark the measurement on the tile and use a saw to carefully cut out the marked portion. Test the tile around the outlet to ensure it fits properly before applying adhesive.

Finishing the Installation

Once all the tiles are installed, allow the adhesive to dry according to the manufacturer’s instructions. After the adhesive has dried, remove the spacers and fill any gaps between the tiles with caulk. Use a caulk gun to apply the caulk and smooth it out with a damp cloth. Allow the caulk to dry for at least 24 hours before painting or staining the tiles to your desired finish.


Installing wooden wall tiles is an easy and affordable way to bring character and warmth to any room. By following these steps, you can achieve a professional-looking finish in no time. Remember to choose the right materials, measure and cut the tiles properly, apply the adhesive evenly, and use spacers to create even gaps. With a little patience and attention to detail, you can create a beautiful and durable wall that will enhance the look of your home for years to come.