How to Install Wood Floor Plus

Wood Floor Plus is a beautiful and durable flooring option that can instantly enhance the look and feel of any room in your home. Whether you are installing it yourself or hiring a professional, this step-by-step guide will help you in the installation process. With proper preparation and careful execution, your Wood Floor Plus will provide you with years of enjoyment and add value to your home.

Step 1: Measure and Calculate

Before making any purchases or starting the installation process, it is crucial to accurately measure the area where you plan to install the Wood Floor Plus. Measure the length and width of the room, and multiply them to get the total square footage. When purchasing the flooring, it is always a good idea to buy an extra 10% to accommodate for any mistakes or future repairs.

Step 2: Prepare the Subfloor

Preparing the subfloor is a critical step to ensure a stable and long-lasting Wood Floor Plus installation. Start by removing any existing flooring, carpets, or debris from the area. Next, check for any squeaky or loose spots in the subfloor and address them by screwing down any loose boards or adding additional reinforcements. It is also essential to check the flatness of the subfloor; any significant imperfections should be fixed or leveled before proceeding.

Step 3: Acclimate the Wood Floor Plus

Wood is a natural material that can expand or contract depending on the humidity and temperature of its environment. To allow the Wood Floor Plus to adjust to the conditions of the room, it is crucial to acclimate the flooring before installation. Leave the boxes of flooring in the room for at least 48 hours, ensuring that the temperature and humidity levels are similar to those of the room. This step will minimize any potential issues, such as warping or gaps, after installation.

Step 4: Begin Installation

Start by laying down an underlayment to provide cushioning, sound absorption, and moisture protection for your Wood Floor Plus. Follow the manufacturer’s instructions for the specific underlayment you choose. Next, begin the installation, starting in a corner of the room. Lay the first row of planks alongside the longest wall, with the tongue side facing the wall. Use spacers to ensure a consistent gap between the planks and the wall, allowing room for expansion.

Connect the planks together by angling the tongue of one plank into the groove of the previous plank, and pressing them together firmly until you hear a click. Repeat this process for the entire first row, ensuring that the seams between planks are staggered for better stability. Cut the last plank of the row to fit as necessary, leaving a 1/4-inch gap from the wall. Begin the second row with the remaining piece of the plank cut from the first row, ensuring a staggered pattern.

Step 5: Finishing Touches

Once you finish installing the Wood Floor Plus, remove the spacers and install the baseboards or quarter-round molding to cover the expansion gap around the perimeter of the room. Use a finishing nailer or adhesive, following the manufacturer’s instructions. Finally, thoroughly clean the floor to remove any sawdust or debris, and enjoy your beautiful Wood Floor Plus.

By following these steps, you can successfully install Wood Floor Plus and enjoy a stunning, durable, and long-lasting flooring solution. Remember to take your time, follow the manufacturer’s instructions, and prioritize safety throughout the installation process.