Vinyl luxury plank is a popular flooring option known for its durability, water resistance, and easy maintenance. Whether you want to update your kitchen, bathroom, or any other room in your home, vinyl luxury plank is a great choice. In this guide, we will walk you through the steps to install vinyl luxury plank so that you can enjoy a beautiful and long-lasting floor.

Step 1: Prepare the Surface

Before installing vinyl luxury plank, it is important to prepare the surface properly. Start by removing any existing flooring, such as carpet or tiles. Use a scraper or a pry bar to make sure the surface is clean and free of debris. If you have any imperfections, such as uneven areas or cracks, it is recommended to level the floor using a self-leveling compound. This will ensure that your vinyl luxury plank will lay flat and adhere properly.

Step 2: Measure and Cut the Planks

Once the surface is ready, it’s time to measure and cut the vinyl luxury planks. Start by measuring the length and width of the room to determine the total square footage needed. It is advisable to purchase a few extra planks to account for any mistakes or replacements in the future.

Next, mark the measurements on the planks using a pencil or a marker. Vinyl luxury plank can be easily cut using a utility knife or a vinyl cutter. Score the plank on the marked line and then bend it backwards to snap it along the cut. Repeat this process for all the planks, ensuring they fit properly around corners and edges.

Step 3: Install the Vinyl Luxury Plank

Now that you have the properly measured and cut planks, it’s time to install them. Start by applying double-sided adhesive tape or spread adhesive on the clean and leveled surface. Press the first plank against the wall, ensuring it is straight and aligned with the room. Once it is firmly in place, lay the next plank beside it, attaching the tongue into the groove of the previous plank. Continue this process until you complete the row.

For the next rows, slide the tongue of each new plank into the groove of the previous row’s plank at a slight angle. Gently push the plank down to lock it in place. Use a rubber mallet or a tapping block to ensure a snug fit. Continue this process until the entire floor is covered with vinyl luxury plank.

Step 4: Finishing Touches

After installing the vinyl luxury plank, it’s time for the finishing touches. Install baseboards or quarter round molding to cover the expansion gap left between the planks and the wall. This will give your flooring a polished look while also allowing for flexibility during temperature changes. Clean the floor thoroughly using a damp mop or a vinyl floor cleaner to remove any adhesive residue or dirt.

With these simple steps, you can now enjoy your newly installed vinyl luxury plank floor. Remember to follow the manufacturer’s instructions for specific guidance related to your chosen vinyl luxury plank product. Enjoy your beautiful, durable, and low-maintenance flooring!