If you’re looking for a durable and stylish flooring option that replicates the beauty of natural stone without the
high cost and maintenance, stone look click lock flooring is an excellent choice. This type of flooring offers easy
installation thanks to its click lock system. In this guide, we will walk you through the steps to install your own
stone look click lock flooring, allowing you to transform any room in your home with a stunning stone-like appearance.
Step 1: Prepare the Subfloor
Before beginning the installation process, it is crucial to prepare the subfloor properly. Ensure that the subfloor is
clean, dry, and level. If necessary, remove any existing flooring and thoroughly clean the area. Check for any
imperfections or cracks and fill them with suitable floor patching compound. Allow the compound to dry and then
sand the subfloor until it is smooth and even. Lastly, ensure that the subfloor is free of any debris or dust before
proceeding to the next step.
Step 2: Acclimate the Flooring
Stone look click lock flooring should be acclimated to the room’s environment prior to installation. Lay the flooring
boxes flat in the room for at least 48 hours. This allows the material to adjust to the temperature and humidity
conditions of the space. It is essential to follow the manufacturer’s recommendations regarding acclimation time to
ensure proper installation and prevent any potential issues in the future.
Step 3: Start Installation
Begin by laying down an underlayment, such as foam or cork, to provide a cushioned and moisture-resistant barrier
between the subfloor and the click lock flooring. Start in one corner of the room, preferably in the furthest corner
from the entrance, and lay the first plank with the groove side facing the wall. Use spacers to maintain an expansion
gap along the walls to accommodate any changes due to temperature or humidity. Connect the next plank to the previous
one by aligning the click lock system and gently pressing them together until they click into place. Continue
installing the planks row by row, using a tapping block and rubber mallet to ensure a snug fit. Remember to stagger
the planks for a natural stone look. Repeat this process until you reach the last row, where you may need to trim
the planks to fit the remaining space. Put the finishing touches by installing any necessary transition moldings or
baseboards to complete the installation.