Stone hexagon tile is a beautiful and versatile flooring option that can add an elegant touch to any room. Whether you are planning to install it in your kitchen, bathroom, or any other area in your home, this guide will provide you with step-by-step instructions on how to install stone hexagon tile. Follow these instructions carefully to ensure a successful and professional-looking installation.

Materials needed:

  • Stone hexagon tiles
  • Thin-set mortar
  • Tile spacers
  • Notched trowel
  • Grout
  • Grout float
  • Tile cutter or wet saw
  • Sponge or damp cloth
  • Level

Step 1: Prepare the surface
Before you start installing the stone hexagon tile, ensure that the surface is clean, dry, and level. Remove any existing flooring materials and fill in any cracks or holes. If necessary, use a self-leveling compound to even out the surface. Allow the surface to dry completely before proceeding.

Step 2: Layout and dry fit the tiles
Lay out the stone hexagon tiles on the floor without adhesive to determine the placement and pattern. Adjust the tiles as needed to achieve a balanced and symmetrical design. It is crucial to plan the layout carefully, especially if you are working with different colored or textured tiles. Once you are satisfied with the layout, take a photo or draw a diagram to serve as a reference during installation.

Step 3: Apply thin-set mortar
Use a notched trowel to apply thin-set mortar to a small section of the floor. Start from the center and work your way towards the edges. The notches on the trowel will help create ridges in the mortar, ensuring proper adhesion. Spread only enough mortar that you can cover with tiles within 10 minutes to prevent it from drying out.

Step 4: Install the tiles
Carefully place the stone hexagon tiles onto the mortar, following the layout you determined in step 2. Press the tiles gently but firmly into the mortar to ensure a secure bond. Use tile spacers to maintain consistent spacing between the tiles. Continue this process, working in small sections at a time, until all the tiles are installed. Periodically use a level to check for evenness.

Step 5: Allow the mortar to cure
After the tiles are in place, allow the thin-set mortar to cure as recommended by the manufacturer. This usually takes around 24 hours, but it may vary depending on the type of mortar used. Avoid walking on the tiles or applying any pressure during this curing period to prevent any shifting or movement.

Step 6: Grouting
Mix the grout according to the manufacturer’s instructions. Using a grout float, spread the grout diagonally across the tiles, ensuring that all the joints are filled. Work in small sections and remove excess grout with a damp sponge or cloth. Allow the grout to dry for the specified time indicated on the packaging.

That’s it! With these easy-to-follow steps, you can successfully install stone hexagon tile and transform your space with a classic and timeless look. Remember to take your time during installation and pay attention to detail for a professional finish. Enjoy your new beautiful stone hexagon tile floor!