SPC vinyl flooring is a popular choice for homeowners because it offers durability, water resistance, and easy maintenance. SPC vinyl flooring is designed to look like natural wood or stone, and it’s an excellent option for any room in your home, including bathrooms, kitchens, and even laundry rooms. In this guide, we’ll discuss the steps involved in installing SPC vinyl flooring.
The first step in installing SPC vinyl flooring is to prepare the subfloor. The subfloor must be clean and level before you begin installation. If there are any low spots in the subfloor, fill them with a self-leveling compound. If the subfloor is not level, it can cause the SPC planks to separate or buckle over time.
Once the subfloor is level, it’s time to acclimate the SPC vinyl flooring. Acclimation is the process of allowing the SPC planks to adjust to the temperature and humidity levels in the room where they will be installed. Place the SPC planks in the room where they will be installed and allow them to acclimate for at least 48 hours. The room temperature should be set between 65 and 85 degrees Fahrenheit, and the humidity level should be between 35% and 65%.
After the SPC vinyl flooring has acclimated, it’s time to begin installation. Start by laying out the SPC planks to determine the best placement. It’s best to start in a corner of the room and work your way out. Make sure that you leave a ¼ inch gap between the edge of the SPC planks and the wall to allow for expansion.
To install the SPC vinyl flooring, you’ll need to use a click and lock method. This means that each SPC plank has a tongue and groove that snaps together. Begin by laying the first SPC plank in the corner of the room and locking it into place with the second plank. Continue locking each plank into place until you reach the end of the row. If you need to cut a plank to fit, use a utility knife or a saw.
Once the first row is complete, start the second row by locking the first plank into place. Make sure that the seams between the planks are staggered to create a more natural look. Continue installing the SPC vinyl flooring until the entire room is covered.
When you reach the wall, you’ll need to trim the last plank to fit. To do this, measure the distance between the last plank and the wall, and then subtract ¼ inch to allow for expansion. Cut the plank to size using a saw or utility knife, and then install it into place.
Finally, it’s time to install the trim. Install a quarter-round trim along the baseboards to cover the ¼ inch gap around the edges of the SPC vinyl flooring. Use a finishing nail gun or construction adhesive to secure the trim in place.
In conclusion, installing SPC vinyl flooring is a simple process that can be done by homeowners with some DIY experience. Remember to prepare the subfloor, acclimate the SPC vinyl flooring, and use a click and lock method when installing the planks. With the right tools and some patience, you’ll have beautiful and durable SPC vinyl flooring in no time.