Mohawk Home Rigid Vinyl Flooring is a durable and stylish option for transforming the floors in your home or office. It offers the look and feel of hardwood or tile but with the added benefits of vinyl, including water resistance and easy maintenance. If you’re looking to install Mohawk Home Rigid Vinyl Flooring, follow these simple steps to achieve professional-looking results.
Step 1: Prepare the Subfloor
Before installing Mohawk Home Rigid Vinyl Flooring, it’s important to prepare the subfloor properly. Start by removing any existing flooring and ensure that the subfloor is clean, dry, and level. Remove any dirt, dust, or debris and repair any cracks or imperfections in the subfloor. Mohawk Home Rigid Vinyl Flooring can be installed over wood, concrete, or existing vinyl if properly prepared.
Step 2: Acclimate the Flooring
Before installing the Mohawk Home Rigid Vinyl Flooring, you need to acclimate the planks to the room where they will be installed. Place the unopened boxes of flooring in the room for at least 48 hours to allow it to adjust to the temperature and humidity of the space. This will help prevent any potential issues with expansion or contraction of the planks after installation.
Step 3: Start the Installation
Begin the installation by determining the starting point of the flooring. It is usually best to start in a corner or against a wall. Install the first row of planks with the tongue facing the wall, leaving a 1/4 inch gap between the planks and the wall to allow for expansion. Use spacers to maintain this gap throughout the installation process.
Connect the planks together by angling the long side of the next plank into the groove of the first plank and lowering it into place. Use a tapping block and rubber mallet to gently tap the planks together for a tight fit. Continue installing the first row until reaching the end, ensuring the last plank is cut to fit if necessary.
For subsequent rows, start with a cut plank from the previous row to stagger the seams and create a visually appealing pattern. Always use a 1/4 inch expansion gap along the walls. Continue installing the planks row by row, using a combination of full-length planks and cut pieces as necessary. Use a utility knife or saw to cut the planks to fit around obstacles such as door frames or vents.
Step 4: Finishing Touches
After successfully installing the Mohawk Home Rigid Vinyl Flooring, remove the spacers and install any necessary transition strips or moldings to complete the look. Trim off any excess underlayments or moisture barriers that may be visible. Clean up the installation area, removing any dust or debris.
Lastly, enjoy your new Mohawk Home Rigid Vinyl Flooring! Regular maintenance includes sweeping or vacuuming to remove dirt and dust, and occasional damp mopping with a vinyl floor cleaner. Avoid using abrasive cleaners or chemicals that could damage the floor’s surface. With proper care, your Mohawk Home Rigid Vinyl Flooring will provide years of beauty and durability.