Installing hexagon tiles on your shower floor is an excellent way to add style and elegance to your bathroom. The unique shape of hexagon tiles adds visual interest, creating a stunning focal point in your shower. However, installing these tiles requires careful planning and precise execution. In this guide, we will take you through the step-by-step process of installing hexagon shower floor tiles.

Materials You’ll Need:

Before you begin, gather the following materials:

  • Hexagon shower floor tiles
  • Thin-set mortar
  • Tile spacers
  • Trowel
  • Grout
  • Grout float
  • Sponge
  • Tile cutter or wet saw
  • Level
  • Tape measure

Step 1: Prepare the Shower Floor

Start by removing the existing flooring material and thoroughly clean the subfloor. Ensure that the subfloor is flat and level, as any unevenness can compromise the integrity of the tile installation. Use a level and a tape measure to check for any irregularities.

Step 2: Lay Out the Tiles

Before you start applying mortar, dry lay your tiles to determine the best layout. Lay a row of tiles along the longest wall parallel to the entrance of the shower. Use tile spacers between each tile to ensure even spacing. Adjust the layout if needed to avoid having small, narrow cuts on the shower entrance side.

Step 3: Apply Thin-Set Mortar

Using a notched trowel, spread a layer of thin-set mortar on a small section of the shower floor. Create ridges in the mortar by combing it with the notched side of the trowel. Begin from the back of the shower and work your way towards the entrance.

Step 4: Install the Tiles

Carefully press each tile into the mortar, ensuring that it is aligned with the surrounding tiles and sits flat and level. Gently wiggle each tile as you press it into place to ensure a secure bond. Use tile spacers to maintain consistent spacing between the tiles.

Step 5: Cut Tiles to Fit

Once you reach the edges of the shower floor, you will likely need to cut some tiles to fit. Measure each cut carefully and use a tile cutter or wet saw to make precise cuts as needed. Remember to wear protective goggles and gloves when operating power tools.

Step 6: Allow the Mortar to Cure

After installing all the tiles, allow the thin-set mortar to cure according to the manufacturer’s instructions. This typically takes about 24 hours but may vary depending on the product.

Step 7: Grout the Tiles

Mix the grout according to the manufacturer’s instructions. Using a grout float, apply the grout over the tiles, ensuring complete coverage and filling all the joints. Hold the float at a 45-degree angle and work diagonally across the tiles, pressing the grout firmly into the joints. Remove any excess grout from the tile surfaces using the edge of the float.

Step 8: Clean the Tiles

Allow the grout to set for a few minutes, then use a damp sponge to wipe away excess grout from the tile surfaces. Rinse the sponge frequently and ensure all grout haze is removed. Be careful not to disturb the grout lines. Allow the grout to fully cure before using the shower.

Following these steps will help you achieve a professional-looking hexagon shower floor tile installation. Remember to take your time and double-check each step to ensure accuracy and precision. With proper installation and maintenance, your hexagon shower floor tiles will provide an eye-catching feature for years to come.