How to Install Armstrong Vinyl Flooring

When it comes to choosing a durable and stylish flooring option for your home or office, Armstrong vinyl flooring is a great choice. Not only is it affordable, but it is also easy to install, making it a popular DIY project for many homeowners. This informative guide will walk you through the steps of installing Armstrong vinyl flooring, providing you with all the necessary information to complete the job confidently and efficiently.

Step 1: Gather the Necessary Tools and Materials

Before you begin, it’s important to gather all the tools and materials you will need for the installation. You will need the following:

  • Armstrong vinyl flooring tiles or planks
  • Measuring tape
  • Straightedge
  • Utility knife
  • Vinyl flooring adhesive
  • Trowel or notched spreader
  • Roller
  • Flooring adhesive remover (if needed)
  • Underlayment (if required by the manufacturer)

Step 2: Prepare the Subfloor

Before you can install the vinyl flooring, you need to ensure that the subfloor is clean, dry, and level. Remove any existing flooring, adhesive, or carpet padding. If there are any uneven areas, use a leveling compound to create a smooth surface. Make sure to follow the manufacturer’s instructions for preparing the subfloor.

Step 3: Measure and Cut the Vinyl Flooring

Measure the dimensions of the room accurately to determine how much Armstrong vinyl flooring you will need. It’s always a good idea to purchase some extra material to account for any inaccuracies or future repairs. Use a straightedge and a utility knife to cut the vinyl flooring tiles or planks to fit the space. Be careful when cutting and ensure that your measurements are accurate for a perfect fit.

Step 4: Apply and Spread the Adhesive

Follow the manufacturer’s instructions to mix the adhesive properly. Using a trowel or notched spreader, apply the adhesive evenly to the subfloor. Work in small sections to prevent the adhesive from drying out. Make sure to leave the recommended drying time before moving on to the next step.

Step 5: Install the Vinyl Flooring

Now it’s time to install the Armstrong vinyl flooring. Start by laying down the first tile or plank in one corner of the room, ensuring a tight fit against the wall. Press it firmly into the adhesive. Continue installing the rest of the flooring, using a roller to ensure good adhesion and to remove any air bubbles or wrinkles.

Step 6: Finishing Touches

Once the vinyl flooring is installed, carefully trim any excess material using a utility knife. If needed, apply baseboard or molding to cover the expansion gap around the perimeter of the room. Clean the newly installed flooring thoroughly with a suitable cleaner recommended by the manufacturer.

Step 7: Enjoy Your New Floor

With proper installation, Armstrong vinyl flooring can provide a beautiful and durable flooring solution for many years to come. Now that the installation is complete, it’s time to enjoy the results of your hard work. Sit back, relax, and appreciate the new look and feel of your space!