Are you looking for a stunning and unique flooring option for your bathroom? A pebble stone bathroom floor can undoubtedly add a touch of nature and tranquility to your space. The smooth and rounded stones create a comfortable walking surface, reminiscent of walking along a peaceful riverbank. In addition to its aesthetic appeal, a pebble stone floor provides excellent traction, making it ideal for wet areas like bathrooms. If you’re ready to transform your bathroom floor, follow our step-by-step guide to install a pebble stone flooring.
Materials You Will Need:
- Pebble stones
- Thin-set mortar
- Grout
- Grout sealer
- Tile spacers
- Trowel
- Sponge
- Bucket
- Notched trowel
- Grout float
Step 1: Prepare the Subfloor
Before installing the pebble stone floor, ensure that the subfloor is clean, dry, and even. Remove any existing flooring material and sweep away any debris. If needed, apply a self-leveling compound to even out any uneven areas. Allow it to dry completely before proceeding.
Step 2: Test and Arrange the Pebble Stones
Prior to installation, lay out the pebble stones on the floor to determine the desired pattern and ensure that you have enough to cover the entire area. This step will also help you identify any stones that may need to be trimmed or reshaped to fit the edges or corners. Make any necessary adjustments before moving on.
Step 3: Apply Thin-Set Mortar
Using a trowel, spread a layer of thin-set mortar onto the prepared subfloor in small sections. The layer should be about 1/4 inch thick. Work with a small area at a time to prevent the mortar from drying too quickly.
Step 4: Place the Pebble Stones
Gently press the pebble stones into the thin-set mortar, following the pattern you established during the layout process. Ensure that each stone is fully embedded in the mortar and evenly spaced using tile spacers.
Step 5: Grout the Stones
Once the thin-set mortar has dried according to the manufacturer’s instructions, remove the tile spacers. Mix the grout according to the package instructions, and then use a grout float to apply it to the spaces between the pebble stones. Work the grout into the gaps, making sure they are completely filled.
Step 6: Clean and Seal
After the grout has dried for approximately 10 to 15 minutes, use a damp sponge to gently wipe away any excess grout from the surface of the pebble stones. Rinse the sponge frequently to avoid smearing grout over the stones. Allow the grout to cure for about 24 hours before applying a grout sealer to protect the surface and make it easier to maintain.
By following these steps, you can successfully install a pebble stone bathroom floor. Remember to take your time during each stage to ensure a beautiful and long-lasting result. Enjoy the natural beauty and unique texture of your new pebble stone bathroom floor!