Lifeproof flooring is a popular choice for homeowners due to its durability and water resistance. One of the beautiful options available in the Lifeproof range is the Dusk Cherry. This stunning flooring choice adds warmth and elegance to any room. If you are considering installing Dusk Cherry Lifeproof in your home, this informative guide will provide you with step-by-step instructions to help you achieve a successful installation.
Step 1: Prepare the Subfloor
Before installing Dusk Cherry Lifeproof, it is crucial to ensure that the subfloor is clean, level, and smooth. Start by removing any existing flooring, nails, or staples. Sweep or vacuum the subfloor thoroughly to eliminate any dust or debris. If the subfloor has imperfections, such as cracks or bumps, consider using a self-leveling compound to create a smooth surface for installation.
Step 2: Acclimate the Flooring
Lifeproof flooring needs to acclimate to the room’s temperature and humidity before installation for optimal performance. Open the boxes of Dusk Cherry Lifeproof and let the planks sit in the room where they will be installed for at least 48 hours. This step allows the flooring to adjust to the room’s conditions, minimizing the effects of expansion or contraction after installation.
Step 3: Install the Underlayment
Underlayment provides additional moisture protection and smoothness to the Lifeproof flooring. Start by rolling out the underlayment material perpendicular to the direction you plan to install the Dusk Cherry Lifeproof planks. Trim the excess underlayment using a utility knife and secure it to the subfloor with staples or tape. Ensure the underlayment is smooth and free of any wrinkles or gaps before proceeding to the next step.
Step 4: Begin Installation
Start the installation of Dusk Cherry Lifeproof from the left corner of the room, with the tongue side facing the wall. Place spacers between the planks and the wall to allow for expansion. Connect each plank by aligning the grooves and tongues and gently pressing them together. Use a tapping block and a rubber mallet to ensure a tight fit. Continue installing the planks row by row, cutting them to size when needed using a saw.
Step 5: Finishing Touches
Once you have completed the installation of Dusk Cherry Lifeproof, remove the spacers and install baseboards or quarter round molding to cover the expansion gap. Check the manufacturer’s guidelines for specific recommendations on trim installation. Finally, clean the Dusk Cherry Lifeproof flooring using a recommended cleaner to maintain its beautiful appearance and longevity.
By following these step-by-step instructions, you can successfully install Dusk Cherry Lifeproof in your home and create a stunning and durable floor that will last for years to come.